KRX Powertool drives

Model KRX 30

TECHNICAL DATA

FOTOS

Measure:

Recommended excavator weight

5 – 8 t 10K – 20K lb
Rated power

30 kW 40 hp (30 kW)
Length of drive unit

550 mm 22 in
Torque at 380 bar

4400 Nm 3300 lbf·ft
Max. idle oil flow

110 l/min 29 gal/min
Max. operating pressure

400 bar 5800 psi (400 bar)
Weight without attachment

160 kg 353 lb
Hex connection, standard

80 mm 3 in
Standard hole pattern

LB10 LB10
Length of standard cutter head

350 mm 14 inch
Diameter of standard cutter head

370 mm 15 in
Cutting force at 380 bar

23.9 kN 5400 lbf
Recommended idle rpm

80 rpm 80 rpm
Recommended idle oil flow

50 – 70 l/min 13-18 gal/min
Weight of milling attachment

67 kg 149 lbs
Total weight

227 kg 502 lbs
Pick box

PH 22 Type PH 22 Type
Number of picks

26 Pcs 26 Pcs
Standard pick (round shaft)

12/45/38/22 HC type 12/45/38/22 HC type
Standard pick (dragon tooth)

22/46/38/22 HC type 22/46/38/22 HC type
Max. drill diameter

600 mm 24 in
Min. drill diameter

270 mm 11 in
Max. drilling depth at max. drill diameter

1500 mm 59 in
Max. drilling depth at min. drill diameter

2500 mm 98 in
Max. uniaxial compressive strength of the ground

10 Mpa 1450 psi
Recommended idle oil flow

30 – 65 l/min 8-17 gal/min