KRX Powertool drives

Model KRX 30

TECHNICAL DATA

FOTOS

Measure:

Recommended excavator weight
5 – 8 t 10K – 20K lb
Rated power
30 kW 40 hp (30 kW)
Length of drive unit
550 mm 22 in
Torque at 380 bar
4400 Nm 3300 lbf·ft
Max. idle oil flow
110 l/min 29 gal/min
Max. operating pressure
400 bar 5800 psi (400 bar)
Weight without attachment
160 kg 353 lb
Hex connection, standard
80 mm 3 in
Standard hole pattern
LB10 LB10
Length of standard cutter head
350 mm 14 inch
Diameter of standard cutter head
370 mm 15 in
Cutting force at 380 bar
23.9 kN 5400 lbf
Recommended idle rpm
80 rpm 80 rpm
Recommended idle oil flow
50 – 70 l/min 13-18 gal/min
Weight of milling attachment
67 kg 149 lbs
Total weight
227 kg 502 lbs
Pick box
PH 22 Type PH 22 Type
Number of picks
26 Pcs 26 Pcs
Standard pick (round shaft)
12/45/38/22 HC type 12/45/38/22 HC type
Standard pick (dragon tooth)
22/46/38/22 HC type 22/46/38/22 HC type
Max. drill diameter
600 mm 24 in
Min. drill diameter
270 mm 11 in
Max. drilling depth at max. drill diameter
1500 mm 59 in
Max. drilling depth at min. drill diameter
2500 mm 98 in
Max. uniaxial compressive strength of the ground
10 Mpa 1450 psi
Recommended idle oil flow
30 – 65 l/min 8-17 gal/min