Model KRX 45
TECHNICAL DATA
Measure:
- Recommended excavator weight9 – 12 t 20K – 25K lb
- Rated power45 kW 60 hp (45 kW)
- Length of drive unit610 mm 24 in
- Torque at 380 bar6100 Nm 4500 lbf·ft
- Max. idle oil flow130 l/min 34 gal/min
- Max. operating pressure400 bar 5800 psi (400 bar)
- Weight without attachment240 kg 529 lb
- Hex connection, standard80 mm 3 in
- Standard hole patternLB20 LB20
- Length of standard cutter head350 mm 14 inch
- Diameter of standard cutter head400 mm 16 in
- Cutting force at 380 bar30.7 kN 6900 lbf
- Recommended idle rpm65 rpm 65 rpm
- Recommended idle oil flow65 – 90 l/min 17-24 gal/min
- Weight of milling attachment86 kg 190 lbs
- Total weight326 kg 719 lbs
- Pick boxPH 22 Type PH 22 Type
- Number of picks29 Pcs 29 Pcs
- Standard pick (round shaft)12/45/38/22 HC type 12/45/38/22 HC type
- Standard pick (dragon tooth)22/46/38/22 HC type 22/46/38/22 HC type
- Max. drill diameter800 mm 32 in
- Min. drill diameter270 mm 11 in
- Max. drilling depth at max. drill diameter1500 mm 59 in
- Max. drilling depth at min. drill diameter3000 mm 118 in
- Max. uniaxial compressive strength of the ground20 Mpa 2901 psi
- Recommended idle oil flow35 – 80 l/min 9-21 gal/min
